Power Maxed Copper Plumber's Weld Putty
Power Maxed Copper Plumber's Weld
Copper Repair Putty is a copper-filled epoxy putty for permanent repairs to non-ferrous metals such as copper, bronze and brass. It can be used to seal joints and leaks in pipes, elbows, traps and drains. Each handy stick contains pre-measured portions of activator and base throughout. No measuring or mixing tools are necessary.
Each handy stick contains pre-measured portions of activator and base throughout – no measuring or mixing tools are necessary. As the epoxy is mixed, the two contrasting colours blend into one colour to indicate complete mixing. The consistency eliminates drips and runs, facilitates adhesion to the substrate, and allows the material to be shaped and formed as needed before curing begins. Power Maxed Copper Plumber's Weld Putty is specially formulated to have the same appearance and texture as copper once cured. Once cured (within minutes of application), the Copper Plumber's Weld Putty can be tapped, drilled, sawed, filed or painted. Domestic hot water pipes and vessels can be restored to service after one hour.
Suitable for interior or exterior use, it is resistant to water, chemicals, and temperature extremes. Power Maxed Copper Plumber's Weld contains no solvents or VOC's. It's non-flammable and releases no noxious fumes. It won't shrink or pull away. The unused portion stays fresh for future use when saved in its original package.
- Upper Temperature Limit Continuous (°C): 120
- Store Out Of Direct Sunlight
- Shelf Life Will Be 18 Months From The Date Of Manufacture
- Colour When Fully Cured: Copper
- CUT: Remove required amount of putty
- MIX: Thoroughly knead putty with fingers to a uniform colour
- APPLY: Press putty firmly to the surface to be repaired